Forum Replies Created
-
Posts
-
Thank you for doing this it has been very helpful. I have attempted these steps and they worked for me except during the end of the sandbox app install. I got these errors:
Creating projector calibration configuration file /home/test/.config/Vrui-10.2/Applications/CalibrateProjector.cfg
tee: /home/test/.config/Vrui-10.2/Applications/CalibrateProjector.cfg: No such file or directory
Creating SARndbox configuration file /home/test/.config/Vrui-10.2/Applications/SARndbox.cfg
tee: /home/test/.config/Vrui-10.2/Applications/SARndbox.cfg: No such file or directory
Creating per-user configuration file /home/test/.config/SARndbox-2.12/SARndbox.conf
Installing ARSandbox icon /home/test/.local/share/icons/hicolor/64×64/apps/SARndbox.png
Package SARndbox, version 2.12, successfully installedWhen I checked the folder structure, the /home/test/.config/Vrui-10.2/Applications folder did not exist.
Also when ran the RawKinectViewer -compress 0 command I got this error:
RawKinectViewer: Connected to 3D camera with serial number A70773V03192237A
Kinect::Camera::getIntrinsicParameters: Could not load intrinsic parameter file /opt/Vrui-10.2/etc/Kinect-3.15/Kinect-3.15/IntrinsicParameters-A70773V03192237A.dat due to exception IO::StandardFile: Unable to open file /opt/Vrui-10.2/etc/Kinect-3.15/Kinect-3.15/IntrinsicParameters-A70773V03192237A.dat for reading due to error 2 (No such file or directory)it looks like the viewer is looking for a nested Kinect folder inside the first kinect folder.
Here is the second edit to the build-ubuntu.sh file I made to NOT overwirte the updated/edited frameworkviewer.h file:
#I commented this entire section after the first run. Then hard coded the vrui dir name
#Download and unpack Vrui tarball:
#echo “Downloading Vrui-$VRUI_VERSION-$VRUI_RELEASE into $HOME/src”#wgethttp://web.cs.ucdavis.edu/~okreylos/ResDev/Vrui/Vrui-$VRUI_VERSION-$VRUI_RELEASE.tar.gz | tar xfz
#cd Vrui-$VRUI_VERSION-$VRUI_RELEASE
cd Vrui-8.0-002
#DOWNLOAD_RESULT=$?#if [ $DOWNLOAD_RESULT -ne 0 ]; then
#echo “Problem while downloading or unpacking Vrui; please check your network connection and try again”
#exit $DOWNLOAD_RESULT
#fiI was able to work around the TLS issue by using the LMDE 6 “Faye” version of Mint Linux. I still had to make the edits mentioned in the .sh file, but the rest of the process worked as expected.
http://doc-ok.org/?topic=errors-during-build-ubuntu-sh-processing
I was able to work around the size_t error by adding the missing include statement into the frameworkvierwer.h file, then commenting out the download Vrui tarball line in the main script, I also had to hard coding the CD Vrui-8.0-002 line. That got me to the TLS error mentioned here:
http://doc-ok.org/?topic=tls-error-while-compling-vrui-form-script
Here is the complete error:
Linking /home/arsandbox/src/Vrui-8.0-002/lib/x86_64-linux-gnu/VRVislets/libLatencyTester.so…
/usr/bin/ld: _ZN18GLARBShaderObjects7currentE: TLS reference in o/g++-3.g0.O3/pic/Vrui/Vislets/LatencyTester.o mismatches non-TLS reference in /home/arsandbox/src/Vrui-8.0-002/lib/x86_64-linux-gnu/libVrui.so
/usr/bin/ld: /home/arsandbox/src/Vrui-8.0-002/lib/x86_64-linux-gnu/libVrui.so: error adding symbols: bad value
collect2: error: ld returned 1 exit status
make: *** [makefile:1691: /home/arsandbox/src/Vrui-8.0-002/lib/x86_64-linux-gnu/VRVislets/libLatencyTester.so] Error 1
make: *** Waiting for unfinished jobs….
Linking /home/arsandbox/src/Vrui-8.0-002/lib/x86_64-linux-gnu/VRDevices/libArtDTrack.so…
Build unsuccessful; please fix any reported errors and try againMy version of Mint is 21.2, I could not locate a 19.x version to download.
