KeckCAVES on Mars

You might have heard that NASA has a new rover on Mars. What you might not know is that KeckCAVES is quite involved with that mission. One of KeckCAVES’ core scientists, Dawn Sumner, is a member of the Curiosity Science Team. Dawn talks about her experiences as tactical long term planner for the rover’s science mission, and co-investigator on several of the rover’s cameras, on her blog, Dawn on Mars.

Immersive 3D visualization has been used at several stages of mission planning and preparation, including selection of the rover’s landing site. Crusta, the virtual globe software developed by KeckCAVES, was used to create a high-resolution global topography model of Mars, merging the best-quality data available for the entire planet and each of the originally proposed landing sites. Crusta’s ability to run in an immersive 3D display environment such as KeckCAVES’ CAVE, allowing users to virtually walk on the surface of Mars at 1:1 (or any other) scale, and to create maps by drawing directly on the 3D surface, was important in weighing the relative merits of the four proposed sites from engineering and scientific viewpoints.

Dawn made the following video after Gale Crater, her preferred landing site, had been selected for the mission to illustrate her rationale. The video is stereoscopic and can be viewed using red/blue anaglyphic glasses or several other stereo viewing methods:

We filmed this video entirely virtually. Dawn is working with Crusta on a low-cost immersive 3D environment based on a 3D TV, which means she perceived Crusta’s Mars model as a tangible 3D object and was able to interact with it via natural gestures using an optically-tracked Nintendo Wii controller as input device, and point out features of interest on the surface using her fingers. Dawn herself was filmed by two Kinect 3D video cameras, and the combination of virtual Mars and virtual Dawn was rendered into a stereo movie file in real-time while she was working with the software.

Now that Curiosity is on Mars, we are planning to continue using Crusta to visualize and evaluate its progress, and we hope that Crusta will soon help planning and executing the rover’s journey up Mt. Sharp (NASA have their own 3D path planning software, but we believe Crusta has useful complementary features).

Furthermore, as the rover progresses, it will send high-resolution stereo images from its mast-mounted navigation camera. Several KeckCAVES developers are working on software to convert these stereo images into ultra-high resolution digital terrain models, and to register these to, and integrate them with, Crusta’s existing Mars topography model as they become available.

We already tried this process with stereo imagery from the previous two Mars rovers, Spirit and Opportunity. We took the highest-resolution orbital topography data available, collected by the HiRISE camera, and merged it with the rover data, which is approximately 1000 times more dense. The following figure shows the result (click to embiggen):

The white arrow in panel A shows the location of the rover’s high-resolution data patch shown in panels B and C. In panel C, a stratum of rock — identified by its different color — was selected, and a plane was fit to the selected points (highlighted in green) to measure the stratum’s bedding angle.

The above images were created with LiDAR Viewer, another KeckCAVES software package. LiDAR Viewer is used to visually analyze very large 3D point clouds, such as those resulting from laser scanning surveys, or, in this case, orbital and terrestrial stereo imagery.

The terrain data we expect from Curiosity’s stereo cameras will be even higher resolution than that. The end result will be an integrated global Martian topography model with local patches down to millimeter resolution, allowing a scientist in the CAVE to virtually pick up individual pebbles.

2 thoughts on “KeckCAVES on Mars

  1. Pingback: KeckCAVES on Mars, pt. 2 | Doc-Ok.org

  2. Pingback: I Can’t Ever Get Over This Mars Thing, Can I? | Doc-Ok.org

Leave a Reply

Your email address will not be published. Required fields are marked *